#Dsc Serial Protocol how to#
#Dsc Serial Protocol install#
#Dsc Serial Protocol code#

Identifies the rack whose ID you are configuring to be the serial ID. The serial ID is included as an entry in the DSC table. No dsc serial serial_id rack rack_num Syntax Description serial_id To remove a serial ID entry from the designated shelf controller (DSC) table, To define the serial ID for a rack, use the dsc serial command in administration configuration mode.

#Dsc Serial Protocol how to#

This example shows how to set the minimum number of modular power modules to six: RP/0/RP0/CPU0:router(admin-config)# crs16 set min-power-modules 6 location 0/AM0/SP dsc serial

Use the crs16 set min-power-modules command to configure the number of modular PEMs to be used if you are using less than the default number. Six DC power modules or five AC power modules Command Modes The node-id is expressed in the notation rack/ slot/ * NoteД®nter the show platform command to see the location of alarm nodes installed in the router.

Location of an alarm module for which to specify the number of power modules. Minimum number of power modules for the chassis. No crs16 set min-power-modules number location node-id Syntax Description number To remove the configuration and revert to the default, use the no form of this command.Д¬rs16 set min-power-modules number location node-id To configure the minimum number of modular power entry modules (PEMs) on the 16-slot line card chassis, use the crs16 set min-power-modules command in administration configuration mode. This example shows how to set the minimum number of modular power modules to three: RP/0/RP0/CPU0:router(admin-config)# crs8 set min-power-modules 3

#Dsc Serial Protocol install#

This command and you install less then the default number of PEMs, you receive alarm messages. Use the crs8 set min-power-modules command to configure the number of modular PEMs to be used if you are using less than the default number. Group assignment is preventing you from using a command, contact your AAA administrator for assistance. To use this command, you must be in a user group associated with a task group that includes appropriate task IDs. Values can be from 0 to 4.ДЇour DC power modules or three AC power modules Command ModesДЄdministration configuration Command History Release No crs8 set min-power-modules number Syntax Description number To remove the configuration and revert to the default, use the no form of this command. To configure the minimum number of modular power entry modules (PEMs) on the 8-slot line card chassis, use the crs8 set min-power-modules command in administration configuration mode. The commands used to manage the hardware redundancy, power, and administrative hw-module service maintenance-mode location.Hardware Redundancy and Node Administration Commands.Is anybody able to help me out with on this matter, IвЂ™ve been looking in so many options and communicators.

#Dsc Serial Protocol code#

The protocol of the Paradox Serial Communication is a 37 Bytes Code, but will be quite difficult for me to create that code as my knowledge is not that high. So in order to send my events to a monitoring Dispatch Security Company I need to emulate either a DSC Panel or slightly easier way, Paradox Alarm Panel Events directly over Serial and use the OpenHab Serial Binding. I am away quite a lot and want the Alarm System to be Monitored by a Dispatch Security Company over GPRS and looks like all GPRS Communicators are made for DSC - Keybus Connection or Paradox Serial Protocol. The Alarm System based on WAGO PLC has its own way of sending SMS to my and my family but thru Digital IOвЂ™s, Like Alarm: Armed, Disarmed, Away or Stay, System In Alarm or OK, Fire/Water/Gas Alarm or OK,MainвЂ™s Power Los and Recovery. The Alarm System based on a WAGO PLC communicates to OPENHAB via Modbus Protocol and all events are interpreted correctly in OPENHAB via liked Items. Is there a way to emulate a DSC or Paradox Alarm Panel Serial Data in order to connect my Self Made Alarm System based on a WAGO PLC to a Monitoring Security Company over GPRS using a standard Communicator via OPENHAB.